The selection of stainless steel plate should consider the operating conditions of use, such as manual operation or automatic operation, the performance and type of the heat press machine, and the quality requirements for the pressed material such as hardness, gloss, etc. Economic accounting should also be considered, and each time a new polished steel plate is required, it is required to produce a slow quality decorative plate.
In addition, when selecting the most reasonable thickness of the steel plate, its use time, quality, and stiffness should be considered, and the strength requirements of the plate when it is pressed should be considered; Heat conductivity; The distribution of pressure, the format specification of the pressure platen.
If the thickness of the steel plate is not enough, it is easy to bend, which will affect the production of decorative plates. If the thickness is too large and the steel plate is too heavy, it will not only increase the cost of the steel plate, but also bring unnecessary difficulties to the operation. At the same time, it is also necessary to consider the margin that should be left when the stainless steel plate is processed or used. The thickness of the copper plate is not absolutely consistent, but strive to be as consistent as possible in the thickness of the same steel plate, generally medium specifications of saw plate, thickness tolerance of 0.05 to o.15 mm. If the requirements are too strict, the grinding cost will also increase. Generally, it is a steel plate with large tension resistance and hardness, the greater the resistance to mechanical damage, the longer the durability of use, but the cost of grinding and processing is also relatively high.
